Benchmark experiment of large-angle scattering reaction cross section of iron at 14 MeV using two shadow bars – Comparison of experimental results with ENDF/B-VIII –

ABSTRACT

It is important to perform neutron transport simulations with accurate nuclear data in the neutronics design of a fusion reactor. However, absolute values of large-angle scattering cross sections vary among nuclear data libraries even for well-examined nuclide of iron. Benchmark experiments focusing on large-angle scattering cross sections were thus performed to confirm the correctness of nuclear data libraries. The series benchmark experiments were performed at a DT neutron source facility, OKTAVIAN of Osaka University, Japan, by the unique experimental system established by the authors’ group, which can extract only the contribution of large-angle scattering reactions. This system consists of two shadow bars, target plate (iron), and neutron detector (niobium). Two types of shadow bars were used and four irradiations were conducted for one experiment, so that contribution of room-return neutrons was effectively removed and only large-angle scattering neutrons were extracted from the measured four Nb reaction rates. The obtained experimental results were compared with calculations for five nuclear data libraries including JENDL-4.0, JEFF.-3.3, FENDL-3.1, ENDF/B- VII, and recently released ENDF/B-VIII. It was found from the comparison that ENDF/B-VIII showed the best result, though ENDF/B-VII showed overestimation and others are in large underestimation at 14 MeV.     

A theoretically-based novel protocol for the analytic treatment of the glass failure stresses associated with coaxial double ring test method

With the aim of validating a new standardized Coaxial Double Ring testing procedure, without overpressure and with fixed geometry, an ad hoc theoretical approach has been proposed here to rearrange the laboratory outcomes accounting for the effects of the geometric non-linearities associated with such a testing configuration. By borrowing this idea, once the experimental values of the failure load have been determined, it has been possible to obtain an expression in closed form (fully defined by only two coefficients) of the maximum tensile stress (σ_max) in the core of the specimen. Following this, in order to make the laboratory outcomes comparable and homogeneous, the σ_max-values have been then re-scaled to a common reference condition (equibiaxial stress on a reference area, σ_eqbx), by means of the use of a correction coefficient (K) able to determine, under a condition of equal probability of failure, the effective area (A_eff) of the tested specimens. After being corrected to account for the effects of the stress corrosion cracking (static fatigue effect), all re-scaled data have been finally interpreted using a Weibull-type statistical distribution to determine the main fractile values of the glass strength. Doing so, despite some unavoidable approximations, this procedure furnished a highly effective means of determining the bending strength of float glass. Unlike the pure numerical approach proposed in codes and literature, which requires to correct the experimental data via FEM simulation, the rationale behind the proposed approach is in fact to elaborate the experimental data through an analytic treatment of the problem, which would greatly facilitate the interpretation of the data as well as the standardization of the testing procedure.     

Digital twin-based assembly data management and process traceability for complex products

Complex products such as satellites, missiles, and aircraft typically have demanding requirements for dynamic data management and process traceability. The assembly process for these complex products involves high complexity, strong dynamics, many uncertainties, and frequent rework and repair, especially in the model development stage. Achieving assembly data management and process traceability for complex products has always been a challenge. A recently proposed solution involves one-to-one mapping of the corresponding physical entity, also known as the digital twin method. This paper proposes a digital twin-based assembly data management and process traceability approach for complex products. First, the dynamic evolutionary process of complex product assembly data was analyzed from three dimensions: granularity, period and version. Then, a framework of digital twin-based assembly data management and process traceability for complex products was constructed. Some core techniques are: 1) workflow-based product assembly data organization and version management; 2) synchronous modeling of the product assembly process based on digital twin; and 3) hierarchical management and traceability of product assembly data based on digital twin. On this basis, an algorithm flowchart for generating a product assembly data package was created, which includes product assembly data management, assembly process traceability, and generation of a product assembly data package. Furthermore, the Digital Twin-based Assembly Process Management and Control System (DT-APMCS) was designed to verify the efficiency of the proposed approach. Some aerospace-related assembly enterprises are currently using DT-APMCS and achieving satisfactory results. Finally, a summary of our work is given, and the future research work is also discussed.     

Heat capacities and standard entropies and enthalpies of some compounds essential for steelmaking and refractory design approximated by Debye-Einstein integrals

Heat capacity data for compounds located in the binary CaO–SiO₂, CaO–Al₂O₃ and MgO–Al₂O₃ systems are fitted by Debye-Einstein integrals. Starting from the fitted heat capacities, the standard values of the thermodynamic functions of these compounds are calculated. In almost all cases investigated, the derived standard entropies are within the uncertainties of the values provided in literature. The Debye-Einstein coefficients obtained in this thermodynamic assessment can be used to approximate the heat capacities, enthalpies and entropies of these compounds in the temperature range from 0 to 298.15 K.     

A wavelet-based multi-dimensional temporal recurrent neural network for stencil printing performance prediction

The solder paste printing (SPP) is a critical procedure in a surface mount technology (SMT) based assembly line, which is one of the major attributes to the defect of the printed circuit boards (PCBs). The quality of SPP is influenced by multiple factors, such as the squeegee speed, pressure, the stencil separation speed, cleaning frequency, and cleaning profile. During printing, the printer environment is dynamically varying due to the physical change of solder paste, which can result in a dynamic variation of the relationships between the printing results and the influential factors. To reduce the printing defects, it is critical to understand such dynamic relationships. This research focuses on determining the printing performance during printing by implementing a wavelet filtering-based temporal recurrent neural network. To reduce the noise factor in the solder paste inspection (SPI) data, this research applies a three-dimensional dual-tree complex wavelet transformation for low-pass noise filtering and signal reconstruction. A recurrent neural network is utilized to model the performance prediction with low noise interference. Both printing sequence and process setting information are considered in the proposed recurrent network model. The proposed approach is validated using practical dataset and compared with other commonly used data mining approaches. The results show that the proposed wavelet-based multi-dimensional temporal recurrent neural network can effectively predict the printing process performance and can be a high potential approach in reducing the defects and controlling cleaning frequency. The proposed model is expected to advance the current research in the application of smart manufacturing in surface mount technology.     

基于IEC 60870-5-104协议的调度命令发送方法研究

对IEC 60870-5-104协议的调度命令进行了研究，提出了一种基于现有IEC 60870-5-104协议的调度命令发送新方法。此技术充分利用了IEC 60870-5-104协议的文件发送功能，通过远程终端单元（RTU）向电厂发送包含调度命令的文本文件。考虑到调度命令在电力系统和电力市场结算系统安全方面的重要性，将该方法应用在电网调度自动化 SCADA 系统中，可以实现交换数据的更高可用性。     

Integration of machine learning and first principles models

Model building and parameter estimation are traditional concepts widely used in chemical, biological, metallurgical, and manufacturing industries. Early modeling methodologies focused on mathematically capturing the process knowledge and domain expertise of the modeler. The models thus developed are termed first principles models (or white-box models). Over time, computational power became cheaper, and massive amounts of data became available for modeling. This led to the development of cutting edge machine learning models (black-box models) and artificial intelligence (AI) techniques. Hybrid models (gray-box models) are a combination of first principles and machine learning models. The development of hybrid models has captured the attention of researchers as this combines the best of both modeling paradigms. Recent attention to this field stems from the interest in explainable AI (XAI), a critical requirement as AI systems become more pervasive. This work aims at identifying and categorizing various hybrid models available in the literature that integrate machine-learning models with different forms of domain knowledge. Benefits such as enhanced predictive power, extrapolation capabilities, and other advantages of combining the two approaches are summarized. The goal of this article is to consolidate the published corpus in the area of hybrid modeling and develop a comprehensive framework to understand the various techniques presented. This framework can further be used as the foundation to explore rational associations between several models.